Post-Mount No-touch Sensor

SD-9963-KSGQ is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since it is touchless, this sensor is ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices where no special clearance is required for exit or where a longer range sensor may cause unwanted activation.



  • * Adjustable sensor range up to 7 in (18cm)
    * Weather resistant for outdoor use
    * Stainless steel plate
    * Hinged plate easily removes from box for easywiring
    * 1A Relay, adjustable trigger duration 0.8~30seconds or toggle
    * Dual voltage: 12/24VDC
    * Gooseneck- or wall-mountable
    * Manual override button
    * LED-illuminated sensor area for easyidentification
    * Selectable LED colors (turns from red to greenor green to red) on sensor activation
    * Includes heavy-duty steel box


Color Camera
Relay Type Form C dry contact, 1A@30VDC
Output Time 0.8~30 s or toggle
Operating Voltage 12~24 VDC
Dimensions 4 x 5-1/2 x 3 in (102 x 134 x 77 mm)
IP Rating - Front Panel Only IP65
LEDs (Switchable) Standby: Red ; Triggered: Green
Operating Temperature -4°~131° F (-20°~55° C)
Current Draw Standby: 16mA@12VDC / 25mA@24VDC, Triggered: 25mA@12VDC / 32mA@24VDC
Range 2 ~ 7 in (5~18 cm)
Response Time 10ms
Type Post-Mount No-Touch Sensor with Access Box
Weight 1-lb 9-oz (710g)
Show Less Show More


Installation Manual SD-9963-KSGQ_InstMenu_141107.pdf